Re: Server Decommision

Any help on this would be greatly appreciated.

"John John - MVP" <audetweld@nbnot.nb.ca> wrote in message
news:OXP5W8TOKHA.220@TK2MSFTNGP02.phx.gbl...<!--coloro:blue--><span style="color:blue <!--/coloro-->
> See in-line:
>
> Zachary wrote:<!--coloro:green--><span style="color:green <!--/coloro-->
>> We currently have a Win2k server that we are looking to decommission so
>> we can install it with windows 2008. This 2k server is a domain
>> controller with no FSMO roles on it but CA is still running on the
>> server. We currently have a 2008 server that is acting as our primary
>> DC. Two questions:
>>
>>
>>
>> First, how can I check whether or not the CA is still being used? I have
>> inherited this setup from a previous IT Group so I am unsure of what
>> practices have been in place before I was here.<!--colorc--><!--/colorc-->
>
> I don't know for sure but unless you properly removed the existing CA and
> created a new one on the new Server 2008 I would think that the CA on the
> Server 2000 would still be used. You could simply disable the Certificate
> Service for an extended period and see what happens, if things go wonky
> you can just re-enable the Certificate service. These might be helpful:
>
>
> How to decommission a Windows enterprise certification authority and how
> to remove all related objects from Windows Server 2003 and from Windows
> Server 2000
>
>
> HOW TO: How to Install/Uninstall a Public Key Certificate Authority for
> Windows 2000
>
>
> Move Certificate Authority to another Windows 2000 Server
>
>
> Back up a certification authority
><!--coloro:green--><span style="color:green <!--/coloro-->
>> Second, if I am unsure or if the services are still needed, can I move
>> the CA to the 2008 server?<!--colorc--><!--/colorc-->
>
> I don't think so, all of the Microsoft information that I have seen always
> says that you must first upgrade Server 2000 to 2003 and then in turn
> upgrade Server 2003 to 2008, there seems to be no direct path to move the
> CA directly from Server 2000 to Server 2008. You may find useful
> information here:
>
>
> You might have better help with this if you ask the folks on one of the
> Server groups, maybe here:
>
>
> John <!--colorc--><!--/colorc-->

 

Ok, from what i have found on the web my best route would be to upgrade the
CA to 2003 and backup and restore it to a 2003 server, then perform the
sames steps for 2008. (,
)

The only question i have left unanswered is weather or not i can find out
why CA is installed on the server in the first place. Anyone have any
suggestions on how to go about finding out what CA is doing for our network?

"Zachary" <zdundore@agraind.com> wrote in message
news:un%23TdrsOKHA.1796@TK2MSFTNGP02.phx.gbl...<!--coloro:blue--><span style="color:blue <!--/coloro-->
> Any help on this would be greatly appreciated.
>
> "John John - MVP" <audetweld@nbnot.nb.ca> wrote in message
> news:OXP5W8TOKHA.220@TK2MSFTNGP02.phx.gbl...<!--coloro:green--><span style="color:green <!--/coloro-->
>> See in-line:
>>
>> Zachary wrote:<!--coloro:darkred--><span style="color:darkred <!--/coloro-->
>>> We currently have a Win2k server that we are looking to decommission so
>>> we can install it with windows 2008. This 2k server is a domain
>>> controller with no FSMO roles on it but CA is still running on the
>>> server. We currently have a 2008 server that is acting as our primary
>>> DC. Two questions:
>>>
>>>
>>>
>>> First, how can I check whether or not the CA is still being used? I
>>> have inherited this setup from a previous IT Group so I am unsure of
>>> what practices have been in place before I was here.<!--colorc--><!--/colorc-->
>>
>> I don't know for sure but unless you properly removed the existing CA and
>> created a new one on the new Server 2008 I would think that the CA on the
>> Server 2000 would still be used. You could simply disable the
>> Certificate Service for an extended period and see what happens, if
>> things go wonky you can just re-enable the Certificate service. These
>> might be helpful:
>>
>>
>> How to decommission a Windows enterprise certification authority and how
>> to remove all related objects from Windows Server 2003 and from Windows
>> Server 2000
>>
>>
>> HOW TO: How to Install/Uninstall a Public Key Certificate Authority for
>> Windows 2000
>>
>>
>> Move Certificate Authority to another Windows 2000 Server
>>
>>
>> Back up a certification authority
>><!--coloro:darkred--><span style="color:darkred <!--/coloro-->
>>> Second, if I am unsure or if the services are still needed, can I move
>>> the CA to the 2008 server?<!--colorc--><!--/colorc-->
>>
>> I don't think so, all of the Microsoft information that I have seen
>> always says that you must first upgrade Server 2000 to 2003 and then in
>> turn upgrade Server 2003 to 2008, there seems to be no direct path to
>> move the CA directly from Server 2000 to Server 2008. You may find
>> useful information here:
>>
>>
>> You might have better help with this if you ask the folks on one of the
>> Server groups, maybe here:
>>
>>
>> John<!--colorc--><!--/colorc-->
>
> <!--colorc--><!--/colorc-->

 

Hi Zachary,

CA is issuing certificates for whatever purpose you may need:
- Encrypting File System,
- E-Mail, signing, encrypting messages
- SSL (https) for your web server, intranet web server, Outlook Web Access
- We use it for logging onto our wireless network.

You can check which certificates you issued, in the CA console.

"Zachary" <zdundore@agraind.com> wrote in message
news:uyitWNuOKHA.1876@TK2MSFTNGP06.phx.gbl...<!--coloro:blue--><span style="color:blue <!--/coloro-->
> Ok, from what i have found on the web my best route would be to upgrade
> the CA to 2003 and backup and restore it to a 2003 server, then perform
> the sames steps for 2008.
> (,
> )
>
> The only question i have left unanswered is weather or not i can find out
> why CA is installed on the server in the first place. Anyone have any
> suggestions on how to go about finding out what CA is doing for our
> network?
>
> "Zachary" <zdundore@agraind.com> wrote in message
> news:un%23TdrsOKHA.1796@TK2MSFTNGP02.phx.gbl...<!--coloro:green--><span style="color:green <!--/coloro-->
>> Any help on this would be greatly appreciated.
>>
>> "John John - MVP" <audetweld@nbnot.nb.ca> wrote in message
>> news:OXP5W8TOKHA.220@TK2MSFTNGP02.phx.gbl...<!--coloro:darkred--><span style="color:darkred <!--/coloro-->
>>> See in-line:
>>>
>>> Zachary wrote:
>>>> We currently have a Win2k server that we are looking to decommission so
>>>> we can install it with windows 2008. This 2k server is a domain
>>>> controller with no FSMO roles on it but CA is still running on the
>>>> server. We currently have a 2008 server that is acting as our primary
>>>> DC. Two questions:
>>>>
>>>>
>>>>
>>>> First, how can I check whether or not the CA is still being used? I
>>>> have inherited this setup from a previous IT Group so I am unsure of
>>>> what practices have been in place before I was here.
>>>
>>> I don't know for sure but unless you properly removed the existing CA
>>> and created a new one on the new Server 2008 I would think that the CA
>>> on the Server 2000 would still be used. You could simply disable the
>>> Certificate Service for an extended period and see what happens, if
>>> things go wonky you can just re-enable the Certificate service. These
>>> might be helpful:
>>>
>>>
>>> How to decommission a Windows enterprise certification authority and how
>>> to remove all related objects from Windows Server 2003 and from Windows
>>> Server 2000
>>>
>>>
>>> HOW TO: How to Install/Uninstall a Public Key Certificate Authority for
>>> Windows 2000
>>>
>>>
>>> Move Certificate Authority to another Windows 2000 Server
>>>
>>>
>>> Back up a certification authority
>>>
>>>> Second, if I am unsure or if the services are still needed, can I move
>>>> the CA to the 2008 server?
>>>
>>> I don't think so, all of the Microsoft information that I have seen
>>> always says that you must first upgrade Server 2000 to 2003 and then in
>>> turn upgrade Server 2003 to 2008, there seems to be no direct path to
>>> move the CA directly from Server 2000 to Server 2008. You may find
>>> useful information here:
>>>
>>>
>>> You might have better help with this if you ask the folks on one of the
>>> Server groups, maybe here:
>>>
>>>
>>> John<!--colorc--><!--/colorc-->
>>
>><!--colorc--><!--/colorc-->
>
> <!--colorc--><!--/colorc-->