1. Welcome Guest! In order to create a new topic or reply to an existing one, you must register first. It is easy and free. Click here to sign up now!.
    Dismiss Notice

[Solved] Print in Win7.

Discussion in 'General Software' started by biferi, May 9, 2019.

  1. biferi

    biferi Registered Members

    Joined:
    Mar 4, 2016
    Messages:
    279
    Operating System:
    Windows 7
    I have Win7. 64 Bit and keep my Photos in a Folder on an USB Hard Drive.

    If I want to Print a Photo I do this.

    I open the Folder that has my Photos and Click on one.
    Then I go up to the Menu Bar and Click Print.

    On the Print screen my Printer is in the Dropdown Box.
    And Photo Paper is in the other Dropdown Box.

    And for Paper Size I pick 4x6 Inch.

    And it Prints good.

    Now I thought I would make my own Coupons up.

    So I Cut a lot of Paper the Size of 3x7 Inch and put them into my Photo Printer.
    I then Exported my Coupon I made in my CorelDraw Program as JPEG.

    And put it into a Folder like I did with my Photos.
    So to Print this I did this.

    I Click on the JPEG Coupon I made just like I did with my Photos.
    Then the Print screen opens.

    And in the Paper Size I see 8x10 Inch 5x7 Inch 4x6 Inch but no 3x7 Inch.

    And I do see Costum so I Click that.
    Then it only show things like A4 and L 89x127 and 2L 127x178.

    So I pick 5x7 Inch and yes I did try 4x6 Inch.
    And both of these Print wrong.

    So I thought I would take the Check out of Fit to Frame.

    And then it Fits but I have a Big White Gap at the Top.
    And if I do put a Check in Fit to Frame it all goes on the 3x7 Inch Coupon I made but a lot is off the Paper.

    How do I do this??
     
  2. Rustys

    Rustys Super-Moderator Super Moderators

    Joined:
    Feb 29, 2016
    Messages:
    1,454
    Location:
    127.0.0.1
    Operating System:
    Linux Based
    Computer Brand or Motherboard:
    Compaq H3900 (Windows 2002)
    CPU:
    Intel (R) PXA250
    Memory:
    64 MB RAM 48 MB ROM
    Hard Drive:
    Yes
    Graphics Card:
    4 D
    Power Supply:
    Solar
    What is the original size of paper you are using before you cut it down? If it is 8.5X11 this should work for you.

    Try this with a regular sheet a paper doing it the same way you do.

    Untitled.png

    on the bottom where it states Copies of each picture change that to two.

    Print then you can cut the then.
     
  3. plodr

    plodr CHF Advisor CHF Advisers

    Joined:
    May 31, 2017
    Messages:
    377
    Operating System:
    Windows 7
    Rustys, he solved this. When I asked him at another forum what printer he was using, he discovered it doesn't do custom sizes. It is a photo printer, Pixma MG7520.
     
    Rustys likes this.
  4. biferi

    biferi Registered Members

    Joined:
    Mar 4, 2016
    Messages:
    279
    Operating System:
    Windows 7
    I am sorry I did not tell you what I am doing in the Right way.
    Let me tell you everything.

    My Printer is a Canon Pixma MG7520.

    In the Paper Tray that takes 8.5X11 I take the Paper out.

    Now the Tray has Sliders on it because you can Print Standard Envelopes.

    So the 8.5 Sliders can come in to make it very skinny.

    So I bring them in to be 4 Inches.

    Now as far as the 11 Inch sliders they can be set to
    A4
    LTR
    B5
    A5

    So I set it to A5.

    So now it is 4. Inches Wide and 9. Inches High.

    So I go into CorelDraw and make my Paper on screen size of 9X4 Inch.

    I make my whole Logo and Text and things like this.

    But when I Print it even Right from CorelDraw it does not Print Right.

    And I Cut the Paper 4X9 Inch.
     

Share This Page