After getting fed up of tripping over this mess, I decided it was time to get constructive. Needed something that was small enough to fit into an old attache case I had, but big enough to take the pedals and to allow extra room for a few more that I have on my shopping list. Am not the best when it comes to woodwork, so decided on something simple. Knocked up a frame and added internal battens to support the top board. All glued and screwed.... even recessed the screw heads and filled with wood filler. Grey primer Matt black final color. Top board screwed and glued Fitted the power supply to the underneath, so as to allow a bit more room on top. Cut a carpet tile to fit and glued this to the top board. Am quite pleased with the final result. And yes, it did fit into the attache case .lol.